Face Frame - Beaded
3 products. Displaying 1 to 3.
Hoffmann / Morso Model No.: NFXL
Manual Notching Machine for Beaded Face Frames
The NFXL series was developed in response to American furniture and cabinet designs requiring wider moulding profiles (for crown moulding on top and toe-kick on bottom of cabinets). **
The machine features a heavy-duty steel frame with cast iron tabletop. The vertical travel of the cutting head, which is also made of cast-iron, can be adjusted depending on workpiece thickness, assuring comfortable and efficient operation. **
The machine is equipped with two cast-iron table extension leaves, which are bolted to the main table. Steel pins provide accurate alignment. Mounted on top of the table extension leaves are anodized aluminum fence rails, which offer material support and are used in conjunction with flip-stops to position multiple cuts along a stile or rail. These fence rails are also bolted and pinned to the table leaves. **
A center stop assembly in the middle of the machine table is used to position the rails for cope cuts. The solid aluminum center stop bar slides in and out and is locked in place with a thumbscrew. Interchangeable nylon center fittings with fine adjustment screws are installed in the center stop bar and are available in different widths, depending on the nose knife used. **
A nylon chip breaker is installed in the machine table. The chip breaker protects the cutting edges of the knives and also prevents any tear-out on the back of the workpiece. **
Heavy aluminum blocks with two setscrews act as “cock-bead" stops. These blocks are mounted on steel guide rails next to the side knives. Once set, the stops limit the forward travel of the cutting head and assure accurate notching depths. Because the stops use the beaded edge of the moulding as reference point, this design completely avoids to problems associated with systems using the opposite moulding edge instead. ** Standard Features:
MORSO NFXL foot operated guillotine for beaded face-frames include:
safety guard **
scrap chute **
four short-arm flip-stops and two long-arm flip-stops **
left and right hand side cast iron table extensions **
left and right hand side aluminum fence rails **
one set of original MORSO side knives, factory ground and honed **
one ¾" wide nose knife and one 1" wide nose knife, factory ground and honed **
detailed instructions incl. parts diagrams
Call (801)498-7891
Details: Technical Specifications:
Max. moulding width:
8” (203mm) **
Max. moulding thickness: 6 ¼” (160mm) **
Nose knife capacity: 1/2" - 1" with standard cutting head -
1/4" , 5/16", 3/8" with smaller cutting head **
Extension tables: Heavy cast iron, smooth machined surface, 30 3/4” long, one left and one right hand side **
Fence rails: Silver anodized aluminum, 59 1/2” total length, one left and one right hand side **
Flip-stops: Aluminum, with locking lever, four with short arm, two with long arm. (Arms are reversible - can be used on left and right hand side.) **
Table height: 33” (floor to table surface) **
Width incl. fence rails: 118” **
Depth incl. scrap chute: 24” **
Machine weight: 220 ½ lbs.
Additional Info: Recommended OPTIONS: Factory-fitted smaller cutting head for 1/4" , 5/16", 3/8" nose knives ** GlideStop fence stop system
Hoffmann / Morso Model No.: NXLEH
Electro-Hydraulic Beaded Face Frame Notching Machine
The machine features a heavy-duty steel frame with cast iron tabletop. The vertical travel of the cutting head, which is also made of cast-iron, can be adjusted in two positions depending on workpiece thickness, assuring fast and efficient operation. When set to the lower setting, the complete cutting cycle (trim cut and finish cut) is completed in 1.5 seconds!!! **
The machine is equipped with two cast-iron table extension leaves, which are bolted to the main table. Steel pins provide accurate alignment. Mounted on top of the table extension leaves are anodized aluminum fence rails which are used in conjunction with flip-stops to position multiple cuts along a stile or rail. These fence rails are also bolted and pinned to the table leaves. **
A center stop assembly in the middle of the machine table is used to position the rails for cope cuts. The solid aluminum center stop bar slides in and out and is locked in place with a thumbscrew. Interchangeable nylon center fittings with fine adjustment screws are installed in the center stop bar and are available in different widths, depending on the nose knife used. **
A nylon chip breaker is installed in the machine table. The chip breaker protects the cutting edges of the knives and also prevents any tear-out on the back of the workpiece. **
Heavy aluminum blocks with two setscrews act as “cock-bead" stops. These blocks are mounted on steel guide rails next to the side knives. Once set, the stops limit the forward travel of the cutting head and assure accurate notching depths. Because the stops use the beaded edge of the moulding as reference point, this design completely avoids to problems associated with systems using the opposite moulding edge instead. ** Standard Features:
MORSO NXLEH series electro - hydraulic guillotine for beaded face-frames include:
safety guard **
scrap chute **
four short-arm flip-stops and two long-arm flip-stops **
left and right hand side cast iron table extensions **
left and right hand side aluminum fence rails **
one set of original MORSO side knives, factory ground and honed **
one ¾" wide nose knife and one 1" wide nose knife, factory ground and honed **
detailed instructions incl. parts diagrams
Call (801)498-7891
Details: Technical Specifications:
Pump motor: 220 volts, single phase, 60 Hz - 1,1 KW, 10 Amp. **
Pump Capacity: 1.85 gal. (7 liters) per minute **
Operating pressure: 1,200 psi (80 bar) **
Hydraulic fluid type: Shell TELLUS S32 or equivalent **
Max. moulding width: 8" (203mm) **
Max. moulding thickness: 5 1/2" (140mm) **
Nose knife capacity: 1/2" - 1" with standard cutting head -
1/4" , 5/16", 3/8" with smaller cutting head **
Extension tables: Heavy cast iron, smooth machined surface, 30 3/4" long, one left and one right hand side **
Fence rails: Silver anodized aluminum, 59 1/2" total length, one left and one right hand side **
Flip-stops: Aluminum, with locking lever, four with short arm, two with long arm (arms are reversible - can be used on left and right hand side) **
Table height: 33" (floor to table surface) **
Width incl. fence rails: 118" **
Depth incl. scrap chute: 24" **
Machine weight: 320 lbs.
U.S. Concepts Model No.: CHF-8
Beaded Frame Hauncher / Notcher
The CHF-8 hauncher is designed for machining of beaded face frame, inset cabinet doors, Etc.. Machine table with the clamped workpiece moves hydraulically down passed the horizontal spindle with the proper profile cutter. The CHF-8 cuts all required corners and notches in seconds without the need to change a set-up. The air-oil feed system, climb-cut motion and table insert ensure a clean cut, even across the grain of the wood.
Call (801)498-7891
Details: Technical Specifications: Maximum cutting length: 1" •• maximum cutting height: 2" •• Maximum tool length: 8" •• Cutter diameter: 6" •• Spindle diameter: 1-1/2" or 40 mm (specify) •• Spindle motor: 7.5 HP •• Number of clamps: 4 •• Number of flip stops: 4 •• Stop bar length: 36" •• Electrics: 230/460/3/60 •• Weight: 600 Lbs
Additional Info: Optional Equipment: 230 volt single phase •• 4', 5', or 6' stop bar
3 products. Displaying 1 to 3.