Ripping Systems
3 products. Displaying 1 to 3.
RAIMANN / WEINIG Model No.: VR III
VALU RIP III INFEED OPTIMIZING SYSTEM
Optimizing Infeed System "Valu-Rip III" Optimizing Infeed for KM 310M and KR 310M ripsaw models consisting of:
15' Infeed with movable servo fence. •
High precision Ultra-sonic Width Measurement Sensor (single point). •
Industrial PC with ergonomic, user friendly 12" Touch Screen. •
Scancore optimizing/tally software, based on clear board width optimizing. •
System fully upgradeble to Valu-Rip IV and/or scanning technologies. System will automatically position servo fence and moving blades appropriate to solution. •
Includes: Office Package (Valu-rip software), Modem, Remote Service Package, Remote service (PC anywhere) allows Raimann technicians to log in and solve technical issues remotely. •
Equipment specifications for material handling: 23" Maximum width, 2.5" Minimum width, 16'0" Maximum length and 36" Minimum length •
Call (801)498-7891
RAIMANN Model No.: KR 310 2M
HEAVY DUTY VALU -RIP IV OPTIMIZING SYSTEM WITH 16 Ft. RH FEED
(2006) Raimann KR 310 2M HEAVY DUTY gang ripsaw with two (2) moving blades, HIGH SPEED package, and Valu-Rip IV 16 Ft. optimizing infeed system. •
FEATURES:
1" min. to 12-1/4" max. width cap. X 3-3/4" max cutting depth (4-1/4" without pressure board); 13-1/2" wide feed chain. 65mm dia. saw arbor; 80mm dia. saw blade bore; arbor driven by 50 HP motor at 3,900 RPM; 9-3/4" min and 15" max. saw blade dia. 2 HP feed motor with feed speeds from 13 to 264 FPM. •
High performance chain with carbide inserts provide a cutting accuracy of +/- 0.005" at speeds of up to 264 FPM; with pneumatic pressure hood and the cast-iron transport chain; chain runs on dual V-guide system providing proper board control; with wear resistant chain dip cams. Extended feed chain with spikes; boards are transported effortlessly into the machine. •
Fast set-up of arbor with QuickFix blade positioning and Laser-fix pivoting lasers; easy access wide open hood and centrally arranged controls; low maintenance closed feed chain; automatic chain lubrication; maintenance-free saw arbor bearings; (5) anti-kick-back rows and locking safety hood with noise protection. •
Saw-blade adjustment system consisting of pressure board clamping device with high phenolic pressure board; (2) speeds for saw blade height adjustment; 1 fixed and 2 moving Lasers Lights including mounting elements. Mechanical adjustment, synchronous with the first and second movable head. •
Raimann Rip-for-Yield & Rip-on-Demand System with 2 movable heads, consisting of positioning system, (2) solid adjustment brackets, (1) bushing to fix saw blade, positioning tolerance +/- 0.005" with adjustment speed 3"/sec. Fast changing of saw blades with ball threaded adjustment; movable control panel. •
Motor driven pressure hood height adjustment with push buttons; electro-motor-driven saw arbor adjustment with push-button; precise Dip Chain with high cutting precision. •
V-belt driven saw arbor allows vibration-free operation; with protection hood; frequency controlled feed speed, infinitely variable; dust hood made of solid steel plate; safety switch at the infeed of the machine for automatic machine STOP in case of oversized boards; Automatic star-delta-starter with thermal over current relays and EMERGENCY STOP switch at the outfeed. Electrics manufactured by Klockner Moeller. Control box fixed to the machine frame. •
Arbor Set-Up possibilities for movable heads (Optimized Ripping) for Rip-On-Demand & Rip-for-Yield; Pressure Shoe, Phenolic; Open design for movable blades; Movable Operator Panel is mounted on a roller support which offers advantages when cutting boards of varying lengths; unit can always be placed near the operator, incl. 16' cable. •
Electronic Control Unit "Proficut II" for 2 movable heads; system controls (2) movable saw units and consists of a programmable controller, battery buffered, memory of 200 values, i.e. 10 cutting programs with 10 values each; touch screen to program nominal values; (20) push-buttons ergonomically arranged for pulling up the pre¬programmed sizes; other control keys for all machine functions such as feed speed, saw ON/OFF, emergency stop, etc. •
Direct input of nominal value with ten-key keyboard; Haul function (can be called or not) for the 2nd movable head; manual operation press adjusting key "left run / right run"; haul function (can be called or not) for 2nd movable head. •
Program Operation with punch pre-set nominal values with push buttons; confirmation switch to start adjustment including haul function for 2nd movable head. •
Feed chain with spikes screwed on to every 3rd chain link; (6mm length) impact depth 0.020". Spikes keep the work piece on the chain and thus guarantee an absolutely parallel board feed and an accurate cut. •
Pressure rollers and pressure board are adjusted with pneumatic cylinders, providing a very smooth drive especially for high performance and glue joint operation; driven outfeed roller; solid driven lower outfeed pressure roller fixed to the machine frame beyond the transport chain, assures the material outfeed and helps prevent end snipes. Solid non-driven upper pressure roller fixed to the pressure hood and height adjustable with the pressure hood, keeps the work piece in place during outfeed. •
(4) MOVING Laser Units with adjusting mechanism are included with the VR IV Valu-Rip •
"Quick-fix"® Arbor allows quick changeover of rip widths WITHOUT the use of a SLEEVE and SPACER set. Simply turn the knurled knob on the outside of the arbor to loosen the blades, move the blades to their new position(s); use a small spacer block for the different widths. Tighten the knurled locking knob, close the machine hood and you are ready to run. Includes spray mist device to prevent blades from seizing on the arbor and to clean dirt and resin from the arbor; consists of a spray nozzle integrated in the cutting area and a 2.5 liter tank, mounted on the machine. Spray material released by pushing a button. •
Optimizing Infeed System "Valu-Rip IV" consisting of: 15'-8" infeed with movable servo-driven fence and driven rolls and pinch wheel. Lateral chains allow boards to be fed into fence and automatically fed into ripsaw. Lateral chains include a set of board stops with a laser rack to show operator rip solutions on the stops while the previous board is being ripped. User can override fence position using the touch screen. With high precision Ultra-Sonic Width Measurement Sensor (single point) attached to ripsaw. System will turn on lasers appropriate to cut solution and position movable blades. •
Includes Industrial PC with ergonomic, user-friendly 12" touch screen. Scancore optimizing/tally software, based on width optimizing; remote service package; remote service (PC anywhere) allows technicians to log in and solve problems remotely. Includes stand alone laser rack with (1) servo-movable laser, synchronous with the movable fence and (2) servo-movable lasers, synchronous with the movable blades; with monitor arm, cable-free, multi-directional positioning of control panel at eye-level. • CONDITION: EXCELLENT -ATFS • Approximate current replacement cost is $300,00.00.
Price: $195,900.00
WEINIG / RAIMANN Model No.: KM 310 2M (UM#571)
VALU RIP III OPTIMIZING SYSTEM 16 FT. INFEED
(2006) ProfiRip KM 310 2M from RAIMANN .12-1/4" Max. width cap. with 25" feed width, 13-1/2" chain width, 50 HP - 4,200 RPM V-belt drive arbor with (2) movable & (3) fixed bladeS; shifting blades positioned from operator controls. •
As the computer or operator moves blades, laser lights follows; fixed saw blade with "Quick Fix" hydro-arbor is mounted on an individual collar that slides up-and-down the arbor into position, then locks into place by tightening end of arbor; no tools & no spacers required. •
Features: 12" Dia. saw blades • 65 mm (2-1/2" dia.) arbor • 4-1/4" max. depth of cut • 17-3/4" centers between upper holddown rollers (phenolic pressure holddown shoe plate included) • 3/4" min. strip width • 19-1/2" min. stock length. •
Variable feed speed from 13 - 115 FPM • feed drive 2.2 HP motor • chain spikes every 3rd chain link • automatic chain lubrication • (2) sets of top & bottom anti-kickback fingers • extended infeed with additional bed roll • adjustable infeed fence. •
Automatic over thickness shutoff on infeed • automatic STAR-DELTA starting • "Proficut 2" PLC controls • 8" dia. dust hood • and resinous wood spray mist device for arbor and blades. •
ValuRip System
Valu-Rip® uses Ultra-Sonic technology to measure the width of the board and present the optimized ripping solution to the operator via laser lights. Valu-Rip® III can also position the board, via a servo fence, in front of the rip saw. •
• Provides you with statistical reports that give you the ability to track incoming and outgoing material.
• System built on the flexible ScanCore foundation to allow for future upgrade as well as customizable reporting.
Optimizing Infeed System “Valu-Rip III”:
consisting of:-
1a) 15’ infeed with movable servo fence. •
1b) High precision Ultra-sonic Width Measurement Sensor (single point). •
2) Industrial PC with ergonomic, user-friendly 12" touch screen. •
3) Scancore optimizing/tally software, based on clear board width optimizing. •
System will automatically position fence and moving blades appropriate to solution. •
Valu-Rip "Office Package" software - Valu-Rip Software License only. To be installed on existing computer/network. •
- Approx. Current New Price is $245,350.00
Price: $158,900.00
Details: TECHNICAL DATA - VALU-RIP III: cutting width from 1" to 12 ¼” • throat opening - 25 ½” • minimum strip width - 7/8" • maximum cutting height with pressure board - 2.5" • maximum cutting height without pressure board - 3" • minimum material length - 15-3/4" • TECHNICAL DATA – KM 310 2M: arbor motor - 50 HP • nominal voltage - 480/3/60 • nominal current - 75 Amp • chain width - 13-1/2" • diameter of saw arbor - 65 mm • saw blade bore - 80 mm ••** standard saw blade diameter - 300 mm (11.8") • feed speed, infinitely variable to 115 FPM • feed motor capacity - 1 HP • working height - 33-1/2" • required dust collection volume - minimum 2500 CFM • diameter of dust suction hood - 250 mm (9-13/16") • net weight - 4100 Lbs • dimensions length x width x height - 5' x 5' x 6.25' •
Additional Info: LOCATION: So.West
3 products. Displaying 1 to 3.